Inoculant- Soybean

  • Inoculant- Soybean

Inoculant- Soybean

$11.00

Description

1 Package does 1500 lbs of Soybeans. This inoculant guarantees a minimum of 200 million (2 x 108) viable cells of Bradyrhizobium japonicum per gram.

Directions for Use: Directions for Use:

• EXCEED STIC FOR SOYBEANS contains a sticking component to aid in adherence of the inoculant to the seed.

• EXCEED STIC FOR SOYBEANS can be mixed in the drill box or applied to the seed and mixed while being augered into the drill. Drill Box Method

• Fill drill box 1/4 or 1/3 full of seed and mix inoculant thoroughly until seed is uniformly coated. Continue with same process until drill is full of seed and thoroughly inoculated. Auger Method

• Apply EXCEED STIC at the recommended rate through a dry powder applicator into the hopper of an auger as the seed is being augered into the drill. The inoculant will mix thoroughly onto the seed from the action of the auger. First Year Soybeans and Adverse Environmental Condition

• In planting situations where soybeans have never been grown for haven’t been grown for 5 years, it is recommended that EXCEED STIC be used at 2x the normal rate or use EXCEED STIC In combination with EXCEED Traditional Liquid inoculant or EXCEED Granular inoculant. Where high levels of nitrogen are available in the soil or over 30 lbs. of available nitrogen have been applied to the soil, rhizobia inoculants will not perform at optimum level.

Storage of EXCEED STIC:• AVOID STORAGE IN DIRECT SUNLIGHT and STORE   PRODUCT AT TEMPERATURE UNDER 78 degrees.• KEEP PRODUCT COOL AND OUT OF SUNLIGHT AND ONLY OPEN WHEN READY TO USE.• EXCEED STIC HAS A ONE YEAR EXPIRATION DATE   AND SHOULD BE USED BEFORE EXPIRATION

-----------------------------------------------------------------------------------------------------------

Liquid Soybean Inoculant treats 41.6 Bu or 2500 lbs This inoculant guarantees a minimum of 5 Billion (5 x 109) viable cells of Bradyrhizobium japonicum per gram.

 Directions for Use Directions for Use:

On-Seed Application

• Shake container to achieve well mixed product.

• Apply EXCEED LIQUID FOR SOYBEANS at 3.4 oz. per 100 pounds of seed. Make sure soybean seeds and inoculant are well mixed to cover all seeds with liquid.

• Over application can cause sticky seeds and clumping of seeds. Allow seeds to dry and stir to break up clumps.

• Contact Visjon Biologics Representatives for recommendations on use in combination with fungicides and insecticides. In-Furrow Application

• Shake container to achieve well mixed product and empty into clean delivery tank. Add clean non-chlorinated water to achieve convenient delivery rate, typically 5 to 15 gallons/acre. Applicator should be calibrated to achieve recommended rate.

• Apply EXCEED LIQUID FOR SOYBEANS in-furrow at a rate of .5 to 1 oz. per 1000 ft. of row. One 85 oz. container at the 1 oz. rate will treat 12.5 acres in 30”rows.

• In-furrow application should be directly on the seed or in the seed furrow, not to the side, above or below the seed. Product should be used within 24 hours of mixing in water.